|
|
| |
| |
| Insert
type of magnetic
card reader |
|
|
|
|
PG-5878
Standalone insert type of
Magnetic card reader |
|
|
|
|
Card
reading |
Magnetic
stripe card, ISO
track II |
|
Type |
Surface
mount, water proof |
|
Operation
mode |
Card,
card and / or
keypad, keypad
only |
|
Monitor
inputs |
Door
contact, Exit
push button, case
tamper |
|
Operation
temperature |
0 C ~ 50C |
|
Humidity |
20%~90%
RH, Non condensation |
|
Power
supply |
12V
DC |
|
Transmission
rate |
4,800
bps, N.8.1 (optional
for 300 ~ 19,200
bps) |
|
Keypad |
With
brief 3 X 4 membrane
keypad for system
programming and
password entry |
|
Interface |
RS-485
or Wiegand output
or TTL(optional) |
|
Dimensions |
120(L)
x 83(W) x 30(H)
mm |
|
Weight |
450g
 5% |
|
- Allow
3000 cards capacity based
and expand 9,999 cards
capacity for Access control
function.
- Operating
mode-card only, card +
door code, cards / door
code.
- Easy
to install, low and designed
for indoor or outdoor
use .
- With
tamper switch and two
loop sensor inputs to
trigger alarm as case
is tampered or loop is
intruded.
- Completed
duress code, variable
door release, door time
and alarm time, error
trials.
- Non-volatile
EEPROM to store system
parameters.
- ARM
/ DISARM function
- With
CPU watch-dog function
to prevent malfunction.
|
| PG-5707
On-line instert type of Magnetic
card reader |
|
| Card
reading |
Magnetic
stripe card, ISO
track II |
| Type |
Surface
mount, water proof |
| Operation
mode |
Card,
card and / or
keypad, keypad
only |
| Monitor
inputs |
Door
contact, Exit
push button, case
tamper |
| Operation
temperature |
0C ~ 50C |
| Humidity |
20%~90%
RH, Non condensation |
| Power
supply |
12V
DC |
| Transmission
rate |
4,800
bps, N.8.1 (optional
for 300 ~ 19,200
bps) |
| Keypad |
With
brief 3 X 4 membrane
keypad for system
programming and
password entry |
| Interface |
RS-485
or Wiegand output
or TTL(optional) |
| Dimensions |
120(L)
x 83(W) x 30(H)
mm |
|
Weight |
450g
5% |
|
-
Allow
3000 cards capacity
based and expand 9,999
cards capacity for Access
control function.
-
Operating
mode-card only, card
+ door code,cards /
door code.
-
Easy
to install, low and
designed for indoor
or outdoor use.
-
With
tamper switch and two
loop sensor inputs to
trigger alarm as case
is tampered or loop
is intruded.
-
Completed
duress code, variable
door release, door time
and alarm time, error
trials.
-
Non-Volatile
EEPROM to store system
parameters.
-
With
CPU watch-dog function
to prevent malfunction.
-
Supporting
multi-channel controller
PCP-832-XX (XX is 4,8,16,32
channels) for PC On-line
control. Each port could
be multi-dropped with
around 10 readers.
|
| |
| |
|
|
|
|
|
|
