Pegasus Lock

Smart Type Magnetic Access Controller

PG-878 / PG-828 Smart standalone access controller

Specifications:

	PG-878V/U/T	PG-828V/U/T
Card holder	PG-878V : for 3000 cards PG-878U : for 7000 cards PG-878T : for 9999 cards	PG-828V : for 3000 cards PG-828U : for 7000 cards PG-828T : for 9999 cards
Card reading	Magnetic stripe card, ISO track II
Type	Swipe and surface mount
Operation mode	Card, card and / or keypad, keypad only, card and PIN in card, free access
Pass code	5 groups of programmable door codes variable from 1 to 8 digits
Monitor inputs	Door contact, Exit push button, case tamper and safety zone sensor input
Operation temperature	0C ~ 50C
Humidity	20%~90% RH, Non condensation
Power supply	12V DC
Dimensions	120(L)x 100(W)x 32(H)mm	156(L)x 123(W)x 42(H)mm
Weight	0.8kg5%	1kg5%

Features:

With tamper switch and two loop sensor inputs to trigger alarm when case is tampered or loop is intruded.
DC 12V operated therefore battery operated be possible when AC power is interrupted.
Allows basically 3,000 magnetic stripe cards or 5 groups of programmable door codes variable from 1 to 8 digits for access control and optionally for 7,000 and 9,999 cards (on special model) can be singly or blockly added / through keypad.
Programmable door release time, error trials, alarm time and door monitoring time.
Data retention for without battery backup.
With programmable mode for ARM / DISARM output.
With CMOS CPU of low power consumption.
Selectable encyphered card format which can not be easily duplicated by ISO Encoder.
Intelligent functions programmable through keypad and with LED's indication.
Metal case and keypad as well as case lock to prevent vandalism.

PG-707 / PG-727 Smart PC on-line access controller

PG-707		PG-727

Specifications:

	PG-707V/U/T	PG-727V/U/T
Model by card holder	PG-707V : for 3000 cards PG-707U : for 7000 cards PG-707T : for 9999 cards	PG-727V : for 3000 cards PG-727U : for 7000 cards PG-727T : for 9999 cards
Card reading	Magnetic stripe card, ISO track II
Type	Swipe and surface mount
Operation mode	Card, card and / or keypad, keypad only, card and PIN in card, free access
Pass code	5 groups of programmable door codes variable from 1 to 8 digits
Monitor inputs	Door contact, Exit push button, case tamper and safety zone sensor input
Operation temperature	0C ~ 50C
Humidity	20%~90% RH, Non condensation
Power supply	12V DC
Dimensions	120(L)x 100(W)x 32(H)mm	156(L)x 123(W)x 42(H)mm
Weight	0.8kg5%	1kg5%

Features:

With tamper switch and two loop sensor inputs to trigger alarm when case is tampered or loop is intruded.
DC 12V operated therefore battery operated be possible when AC power is interrupted.
Allows basically 3,000 magnetic stripe cards or 5 groups of programmable door cades variable from 1 to 8 digits for access control and optionally for 7,000 and 9,999 cards (on special model) can be singly or blocky added/ deleted through keypad.
Programmable door release time, error trials, alarm time and door monitoring time.
Data retention without battery backup.
With programmable mode for ARM/DISARM output.
With CMOS CPU of low power consumption.
Selectable encyphered card format while can not be easily duplicated by ISO Encoder.
Intelligent function programmable through keypad and with LED's indication.
All programming can be done by using the inherent reader and keypad as well as by PC or other Host computer in On-lined mode.
For more advanced control, you may setting all or partial readers to the Host computer for more delicate control.
Metal case and keypad as well as case lock to prevent vandalism.
With CPU watch-dog function to prevent malfunction.